Products / radonIQ
RADONIQ · LORAWAN RADON MONITOR
Continuous measurement.
Remote visibility.
Monitor radon across buildings and property portfolios with a mains-powered sensor and LoRaWAN connectivity.
10 min
measurement updates
12 V DC
mains power, adapter included
Ion chamber
pulsed detection
SPECIFICATIONS
radonIQ specifications.
Continuous radon monitoring with LoRaWAN connectivity and a pulsed ion chamber.
Measurement range
0.2–99.9 pCi/L (7.4–3,696.3 Bq/m³ equivalent)
Measurement updates
Every 10 minutes, with a one-hour moving average. First reading in 10 minutes.
Typical accuracy
Less than 10% at 10 pCi/L (370 Bq/m³) after 10 hours.
Power
12 V DC ±0.1 V, 65 mA. Power adapter included.
Dimensions & weight
80 mm diameter × 140 mm high · 380 g
Operating environment
0–40°C · Relative humidity below 80%
Integration
LoRaWAN connectivity for connection to your chosen network and application platform.
COMPARE RADON SENSORS
radonIQ or radonIQ Pro?
Accuracy figures use different concentrations and averaging periods and should not be treated as a like-for-like performance test. “Pro” identifies the battery-powered model.
MAINS POWERED
radonIQ
Pulsed ion chamber. First reading in 10 minutes, then 10-minute updates with a one-hour moving average. Typical accuracy less than 10% at 370 Bq/m³ after 10 hours.
Choose where a permanent power connection is available.
BATTERY POWERED
radonIQ Pro
Passive diffusion and alpha spectrometry. Hourly LoRaWAN reporting. Typical accuracy/precision at 200 Bq/m³: less than 10% after seven days and less than 5% after two months.
Choose for long-term monitoring without mains power.
DEPLOYMENT AND INTEGRATION
Plan your deployment.
Best suited to long-term monitoring in buildings where a permanent power connection is available. A compatible LoRaWAN network and application are required.
01
Built around portfolio monitoring
Monitor multiple buildings and distributed sites. Use ongoing radon measurements to build a picture of conditions over time.
02
Network and gateway
No local Wi-Fi is required. A suitable LoRaWAN network and gateway backhaul are required. Confirm the regional variant, payload decoder and reporting configuration for your project.
03
Integration and evaluation
Discuss device provisioning, payload decoding and application requirements. For an evaluation, share your target market, site count and integration plans.
Ready to specify radonIQ?
Request a quote, datasheet or regional certification details.